EVERYTHING YOU CAN BUY IS IN STOCK, READY TO SHIP. 95% of shipments are sent Express Post (Exception being large skid plates).We ship daily. Order before 11am for same day shipping.
Fits allKTM 790/890 Adventure R/"S"/Rally bikes. Won't fit on KTM 1X90 bikes.
Rack for2013-2020 KTM 1X90 Adventurebikes -HERE.
Successor of our most versatile luggage rack, now even better - it provides great support for duffle bags, rack-less saddlebags or hard top cases and due to it's 3D milled feature it now sits low and flush with the stock seat.
Additional spacers for removing passenger grab handlesincluded!
Twenty six slots - strapping points for all kind of soft luggage, tool bags or small roll bags,
Reasonably large top surface- approx. 30/19 (W) x 32 (L) cm of completely flat top surface (plus flanges for easy strapping),
Strap-friendly- chamfered, smooth edges,
Strong and durable - CNC milled out of aluminum-magnesium alloy, attached to the bike using M8 bolts - rack can be used to pull and push the bike,
Perfect angle- due to CNC milled angled spacer platforms and angled countersunk holes, rack sits very low, flush with the stock seat and at the same angle as the stock seat (additional Subplate is not needed!),
Rotopax ready- pre-drilled holes for Rotopax mount (mount not included), for 1 or 2 gallon Rotopaxfuel orwater can,
Givi/Kappa Monokey top case ready - pre-drilled holes for Givi adapter kit (not included - check instructions for details) - limited compatibility with plastic Givi Trekker cases - email for details,
SW-motech top case ready- pre-drilled holes for SW-Motech adapter kit (not included- check instructions for details),
Kriega OS-Rack Loops ready- pre-drilled and chamfered holes forKriega OS-rack loops, for perfect mounting of Kriega bags,
8 mm holes for RAM mount - for GoPro or other action cameras, one hole on each flange,
All necessary hardware provided- high quality 10.9 zinc coated bolts and powdercoated spacers,
High quality powder coat - matte black powder coat (top of the line IGP Duraface powders),
Weights approx. 1.0 kg, including mounting hardware.
...
Other option - small and lightweight rack for KTM 790/890 Adventure R/"S"/Rally -HERE.
This rack was designed to carry smaller soft luggage and/or 1 gallon Rotopax container and/or to be used as strapping platform for rack-less bags. It can carry as much weight as mounting points (threaded inserts in the plastic tank) can endure, so it is not recommended putting more then few kilograms to the back. In case of really, really, really rough riding (high speeds over very bumpy terrain) it is recommended to secure luggage carried at the rack in a way to minimize bouncing.
Strong and durable design- upper made of 6 mm aluminium sheet (AlMg3 H22 - 5754) and bracket made of 5 mm aluminium sheet (AlMg3 H22 - 5754).
Strap-friendly, chamfered, smooth edgesof the rack and slots.
Eighteen slots- strapping points for all kind of soft luggage, tool bags or small roll bags.
Easy and seamless integration with rack-less bags
Integrated G-hooks- made for quick mounting and dismounting of rack-less bags and easy refueling.
Holes for Rotopax mount, for 1 gallon Rotopaxfuel orwater can.
Perfectly sized- doesn't stick out - less chance to hurt rider in case of fall. Extension plate will be offered for riders in need of larger surface.
All necessary hardware provided- high quality 10.9 zinc coated bolts and aluminum washers provided.
KTM 690 Enduro/Enduro R/SMC suffer from known and documented problem with weak upper subframe (tank) bolts. This kit minimizes chance of failure of upper subframe (tank) bolts, by preventing free play in lower tank joint and by improving quality and design of upper tank joint.
This is a kit (upper & lower) to suit 2014+ model years of KTM 690 & Husqvarna 701 bikes.
Upper assembly:
Upper bolt caps(qty. 2) are made of AISI 4140 steel, heat treated (for added strength) then zinc coated (rust protection). That makes them virtually indestructible. Size of the head is standard – 27 mm, same as front axle nut. There is M6 threaded hole for OEM bolt holding plastic fairing. Bolt cap is designed to be slim so plastic fairing is not sticking out more then it does when OEM upper bolt is used.
Upper bolts (qty. 2 + optional 2) are 12.9 machine bolts, zinc coated. These are much stronger then OEM upper tank bolts. 25 mm long, so 15 mm is threaded into the bolt cap, when properly torqued. NOTE: in kits for 2014-on bikes additional button head bolts are provided - those are for Husqvarna 701 bikes.
Lower assembly:
Lower bushings (qty. 2) are made of strong plastic - polyamide with molybdenum, much stronger then OEM rubber lower bushings, yet gentle enough to be in close contact with plastic tank (rubber OEM upper bushings are kept, because completely rigid tank-frame connection wont be a good thing). Slightly different size, so they fit better.
Sleeve(qty. 1) is made of AISI 304 stainless steel, without internal thread.
Lower bolt(qty. 1) design is only difference between kit for 2008-2013 and 2014-on bikes. For 2008-2013 bikes high quality M8x140 allen head 12.9 zinc coated bolt is provided. For 2014-on bikes custom M8x155 countersunk 10.9 zinc coated bolt is provided.
Washers (qty. 1) are standard large M8 steel zinc coated washers andnut(qty. 1) is standard M8 steel zinc coated safety nut.
Some luggage options and additional information shown -HERE.
...
Instructions for similar Extension plate for KTM 690 Enduro are shown here - HERE. Installation process is same.
For Extension plate goes the same as for Luggage rack - it was designed to carry lighter soft bags and/or Rotopax container (1 gallon). It can carry as much weight as mounting points (threaded inserts in the plastic tank) can endure, but I don't recommend putting more then few kilograms to the back, because of possible bouncing issues. Checkthis blog post, to learn how to prevent bouncing of the rack.
PERUN MOTO KTM 690 ENDURO LUGGAGE RACK SD (2008-2018)
Strong and durable design,much improved over previous version, with upper made of 6 mm aluminium sheet (AlMg3 H22 - 5754) and bracket made of 5 mm aluminium sheet (AlMg3 H22 - 5754).
Strap-friendly, chamfered, smooth edges of the rack and slots.
Eighteen slots- strapping points for all kind of soft luggage, tool bags or small roll bags.
Holes for Rotopax mount, for 1 gallon Rotopaxfuelorwatercan.
Perfectly sized- doesn't stick out - less chance to hurt rider in case of fall. In case of need, it is easy to expand capacity of the rack by adding bolt-on Extension plate.
Three 8 mm holes for RAM mount (GoPro or other action cameras)t, one on the back and two on the sides.
All necessary hardware provided - high quality 10.9 zinc coated bolts and aluminum washers provided.
This is our small and lightweight rack for 790/890 bikes. If you need a larger rack, able to accept top cases, check -HERE.
Lightweight - only 400 gr,
Low profile - sits low, close to the tail plastics; angled so it is flush with the stock seat,
Sixteen slots - strapping points for all kind of soft luggage, tool bags or small roll bags,
Adequate top surface- approx. 25/13 (W) x 26 (L) cm of completely flat top surface, perfect for 5-10 liter soft bags,
Strap-friendly- chamfered, smooth edges,
Strong and durable - milled out of aluminum-magnesium alloy, attached to the bike using M8 bolts,
Rotopax ready- pre-drilled holes for Rotopax mount (mount not included), for 1 gallon Rotopaxfuel orwater can,
Kriega OS-Rack Loops ready- pre-drilled and chamfered holes forKriega OS-rack loops, for perfect mounting of Kriega bags,
All necessary hardware provided- high quality 10.9 zinc coated bolts and spacers,
High quality powder coat - matte black powder coat (top of the line IGP Duraface powders).
Additional spacers for removing passenger grab handlesincluded!
Designed to be used without passenger grab handles, but it can be used with them too (caution - due to the small size of the rack, grab handles are not fully supported by the rack so use them with caution).
Perfect tie down points for rack-less bags- slots are positioned according toMosko moto Reckless 40andReckless 80bags; may work well with other rack-less systems too,
Successor of our most versatile luggage rack, now even better - it provides great support for duffle bags, rack-less saddlebags or hard top cases and due to it's 3D milled feature it now sits low and flush with the stock seat.
Additional spacers for removing passenger grab handlesincluded!
Twenty six slots - strapping points for all kind of soft luggage, tool bags or small roll bags,
Reasonably large top surface- approx. 30/19 (W) x 32 (L) cm of completely flat top surface (plus flanges for easy strapping),
Strap-friendly- chamfered, smooth edges,
Strong and durable - CNC milled out of aluminum-magnesium alloy, attached to the bike using M8 bolts - rack can be used to pull and push the bike,
Perfect angle- due to CNC milled angled spacer platforms and angled countersunk holes, rack sits very low, flush with the stock seat and at the same angle as the stock seat (additional Subplate is not needed!),
Rotopax ready- pre-drilled holes for Rotopax mount (mount not included), for 1 or 2 gallon Rotopaxfuel orwater can,
Givi/Kappa Monokey top case ready - pre-drilled holes for Givi adapter kit (not included - check instructions for details) - limited compatibility with plastic Givi Trekker cases - email for details,
SW-motech top case ready- pre-drilled holes for SW-Motech adapter kit (not included- check instructions for details),
Kriega OS-Rack Loops ready- pre-drilled and chamfered holes forKriega OS-rack loops, for perfect mounting of Kriega bags,
8 mm holes for RAM mount - for GoPro or other action cameras, one hole on each flange,
All necessary hardware provided- high quality 10.9 zinc coated bolts and powdercoated spacers,
High quality powder coat - matte black powder coat (top of the line IGP Duraface powders),
Weights approx. 1.0 kg, including mounting hardware.
...
Husqvarna Norden 901andGivi Monokeytop case -HERE.
Similar KTM 790 Adventure R withMosko moto Reckless 40 and 80 bags-HERE.
Similar KTM 790 Adventure R withKriega US-20 and US-30 bags-HERE.
EXTENSION PLATE FOR KTM 690 ENDURO LUGGAGE RACK SD (2008-2018)
Thirty eight slots - strapping points for all kind of soft luggage, tool bags or small roll bags,
Extended top surface- approx. 273 (W) x 249 (L) of completely flat top surface,
Strap-friendly- chamfered, smooth edges of the Extension plate and slots,
Holes for Rotopax mount, for 1 gallon Rotopaxfuelorwatercan,
Strongand safe- made of 4 mm aluminum (AlMg3 H22 - 5754) with side flanges bent downwards for added strength and rider protection,
Eleven 8 mm holes for RAM mount(GoPro or other action cameras),
All necessary hardware provided- high quality 10.9 zinc coated bolts, washers and nuts,
High quality powder coating- matte black.
Adds only 0.7 kg, including mounting hardware.
Doesn't fit on Perun moto Husqvarna 701 Luggage rack!
...
InstructionsHERE. Not that anyone needs instructions for it.
...
For Extension plate goes the same as for Luggage rack - it was designed to carry lighter soft bags and/or Rotopax container (1 gallon). It can carry as much weight as mounting points (threaded inserts in the plastic tank) can endure, but I don't recommend putting more then few kilograms to the back, because of possible bouncing issues. Checkthis blog post, to learn how to prevent bouncing of the rack.
Compatibility-Fits on majority of KTM and Husqvarna bikes with 38x90 or 40x90 bolt pattern - all MY KTM 690 Enduro and SMC-R, all MY Husqvarna 701 Enduro and Supermoto (fits on BRP sub-mounts too!), GasGas ES/SM 700, KTM 790 and 890 Adventure, KTM1x90 Adventure bikes, Husqvarna 901 Norden and many more.
Works perfectly with Garmin Montana and Zumo series.
AMPS bolt pattern- for vast number of GPS and phone holders, horizontal and vertical installation possible and approx. 30 mm of fore-aft positioning
Perfectly suited for 2021+ 1290 Super adventure- enough room for "glove compartment" door to be fully opened and perfect placement of the GPS/phone relative to the dashboard,
BRP Submount compatible- works with BRP Submount forKTM 690 Enduro and SMC-R, Husqvarna 701 Enduro and Supermoto,
Billet part- milled out of aircraft grade aluminum-magnesium alloy,
Durable- M4 threads for AMPS mounts are formed (not cut),
Handlebar safe- powder coated, not anodized, which provides smooth contact with handlebar, without scuffs (top of the line IGP Duraface powders used),
All necessary hardware provided- high quality M8 allen head zinc coated bolts and stainless M4 button head bolts.
Very low profile - top rack sits low, close to the tail plastics and at the same angle as the stock seat;
Twenty slots - strapping points for all kind of soft luggage, tool bags or roll bags, slots for perfect mounting of Mosko moto Reckless 80 or Giant loop Siskiyou rack-less bags,
Strong and durable - side rails are made of stainless steel, top plate is milled out of 6 mm aluminum alloy.
Adequate top surface- approx. 294 (W) x 256 (L) mm of completely flat top surface, perfect for 10-20 liter soft bags,
Strap-friendly- chamfered, smooth edges - even on stainless steel side rails,
Lightweight- less than 1.5 kg, including all mounting hardware,
Givi/Kappa Monokey top case ready - pre-drilled holes for Givi adapter kit (not included - check instructions for details) - for rider only (no pillion) -road only use, 5 kg max; won't work with seats higher than stock.
SW-motech top case ready- pre-drilled holes for SW-Motech adapter kit (not included- check instructions for details) - for rider only (no pillion) - road only use, 5 kg max;won't work with seats higher than stock.
Rotopax ready- pre-drilled holes for 1 gallon Rotopax mount (mount not included), for 1 gallon Rotopaxfuel orwater can,
Kriega OS-Rack Loops ready- pre-drilled holes forKriega OS-rack loops, for perfect mounting of Kriega bags,
All necessary hardware provided- high quality 10.9 zinc coated bolts and powder coated spacers,
High quality powder coat - matte black powder coat (top of the line IGP Duraface powders).
Some luggage options and additional information shown -HERE.
...
Instructions for similar Extension plate for KTM 690 Enduro are shown here - HERE. Installation process is same.
For Extension plate goes the same as for Luggage rack - it was designed to carry lighter soft bags and/or Rotopax container (1 gallon). It can carry as much weight as mounting points (threaded inserts in the plastic tank) can endure, but I don't recommend putting more then few kilograms to the back, because of possible bouncing issues. Checkthis blog post, to learn how to prevent bouncing of the rack.
Perfect stand-off for large rack-less systems (Mosko moto Reckless 80orGiant Loop Siskiyou), to keep them away from silencer and rear swing arm (please note - if used with rack-less system on top, only smaller soft bags can be attached to LHS/RHS Rail, like Kriega US-5, Mosko moto Fatty tool roll or standard Tool tube - OS-12 or OS-18 can't be used with rack-less sytem on top of them),
Rack-less luggage support- theseSide carriersare designed to be a support (standoffs) for large rack-less systems, like Mosko moto Reckless 80, Giant loop Siskiyou,Kriega OS-Base, Enduristan Blizzard XL or similar.
Strong and durable - made of stainless steel and aircraft-grade aluminum alloy,
Unique underside billet bracket - for added strength, we designed unique billet aluminum underside bracket, which greatly improves the strength of entire assembly,
Strap-friendly- chamfered, smooth edges and bends with proper radii,
Lightweight- less than 1.6 kg, including all mounting hardware,
All necessary hardware provided- high quality 10.9 zinc coated bolts and powder coated spacers,
High quality powder coat - matte black powder coat (top of the line IGP Duraface powders).
Perfect tie down points for rack-less bags- slots are positioned according to Mosko moto Reckless 80bags andGiant loop Siskiyou soft panniers; may work well with other rack-less systems too,
If OEM grab handles are removed, it is necessary to install additional spacers, to support top luggage rack plate.
Four aluminum spacers, powder coated in matte black,
If you have access to lathe, you can make your own - OD=20, ID=8.2, H=23 (mm).
These spacers are included in hardware kit of Perun moto2021+ KTM 1290 Billet top rack, so no need to buy them separately if you already bought our rack.
Successor of our most versatile luggage rack, now even better - it provides great support for duffle bags, rack-less saddlebags or hard top cases and due to it's 3D milled feature it now sits low and flush with the stock seat.
Additional spacers for removing passenger grab handlesincluded!
Twenty six slots - strapping points for all kind of soft luggage, tool bags or small roll bags,
Reasonably large top surface- approx. 30/19 (W) x 32 (L) cm of completely flat top surface (plus flanges for easy strapping),
Strap-friendly- chamfered, smooth edges,
Strong and durable - CNC milled out of aluminum-magnesium alloy, attached to the bike using M8 bolts - rack can be used to pull and push the bike,
Perfect angle- due to CNC milled angled spacer platforms and angled countersunk holes, rack sits very low, flush with the stock seat and at the same angle as the stock seat (additional Subplate is not needed!)
Rotopax ready- pre-drilled holes for Rotopax mount (mount not included), for 1 or 2 gallon Rotopaxfuel orwater can,
Givi/Kappa Monokey top case ready - pre-drilled holes for Givi adapter kit (not included - check instructions for details) - limited compatibility with plastic Givi Trekker cases - email for details,
SW-motech top case ready- pre-drilled holes for SW-Motech adapter kit (not included- check instructions for details),
Kriega OS-Rack Loops ready- pre-drilled and chamfered holes forKriega OS-rack loops, for perfect mounting of Kriega bags,
8 mm holes for RAM mount - for GoPro or other action cameras, one hole on each flange,
All necessary hardware provided- high quality 10.9 zinc coated bolts and powdercoated spacers,
High quality powder coat - matte black powder coating (top of the line IGP Duraface powders),
Weights approx. 1.0 kg, including mounting hardware.