VANASCHE MOTORSPORTS

Precision machined from Billet 6061 aluminum these pedal pads are very robust and with the anodized finish they look great too. The largest benefit coming from the pressed dowel pins which offer amazing grip as well as a true sense of feedback through pedal feel.

P2 (most popular)- Underside mounted Pedal pad.  Exceptionally STRONG design with the pocketed fit. This is approximately the same sized platform as stock and mounts on the bottom side of the lever. It provides about ~3/8" drop overall from factory. This is designed to work with our Billet Brake Pedals for the ultimate in strength but with a small amount of filing it will work with the stock lever as well.

P3 - Stepped pedal pad which offers two different braking heights for sitting and standing. Designed to work with our Billet Brake Pedals as well as the stock lever. The upper platform level is about the same height as stock, the lower platform is dropped by about 1/2". 

P4 - Slightly Oversized surface area over the stock pedal pad. This pad has two mounting positions so that you can position it further forward or rearward.

Precision machined from Billet 6061 aluminum these pedal pads are very robust and with the anodized finish they look great too. The set screws offer high traction with room for adjustment

P2 (most popular)- Underside mounted Pedal pad.  Exceptionally STRONG design with the pocketed fit. This is approximately the same sized platform as stock and mounts on the bottom side of the lever. It provides about ~3/8" drop overall from factory. This is designed to work with our Billet Brake Pedals for the ultimate in strength but with a small amount of filing it will work with the stock lever as well. NOT recommended for the factory 790/890 levers.

P3 - Stepped pedal pad which offers two different braking heights for sitting and standing. Designed to work with our Billet Brake Pedals. Fits factory 690/701 levers. 790/890 factory levers require mild filing/sanding for fitment. The upper platform level is about the same height as stock, the lower platform is dropped by about 1/2".

P4 - Oversized surface area over the stock pedal pad. This pad has two mounting positions so that you can position it further forward or rearward. Fits all of our billet levers. Fits 690/701/790/890/1090/1190/1290 factory levers

Machined aluminum plate to adapt the AMPS bolt pattern to a 2-hole pattern in order to mount the Perfect Squeeze phone mount sold by Hondo Garage. There are two of the 2-hole patterns: one for portrait orientation, one for landscape orientation.

Fitment: 

• Fit's our 390/790/890 GPS Mount and is used to adapt the AMPS pattern to the two-bolt pattern that Hondo Garage uses on their Perfect Squeeze Mount

Includes: 

• x1 Bare Aluminum Plate
  
• Allows Landscape or Portrait Orientation Mounting of Hondo Device
• Hardware is not included. Amps pattern hardware is included with our gps mount and the hondo 2 bolt pattern is included when you purchase the hondo perfect squeeze. Go to your local hardware store if you've lost these. 

***GPS Mount NOT Included

This kit is used to space/shim your GPS mount further out toward rider to make clearance for windscreen. If you are running an oversize GPS this kit could remedy any interference issues you may be experiencing. 

Includes: 

• Extra Long Bolts (x4)
• 1/2" (12mm) Spacers (x4)

We have found that there is a great deal of variance in windshield mount position from bike to bike (up to 1/2" difference). So for those unfortunate enough to get a 790 with an impeding windscreen, this kit can likely solve your problem. But hey, at least you still get to ride a 790!